• Toll Free: 866-648-6225
    BLACK FRIDAY - USE COUPON BLACK20

HOW TO FILL A CANDY MACHINE (Rhino Classic)

by Bryan La Rue on December 07, 2018

HOW TO FILL A CANDY MACHINE (Rhino Classic)

Bryan La Rue
Founder of VendingNationTV


What's up everyone?? 

Lately we here at Gumball Machine Warehouse have been doing a lot of thinking on the subject of. "How can we make the experience of buying a gumball machine the best we possibly can?" and by doing so, we came up with a bunch of answers. One of those answers was to make sure our customers had all of the information they needed in order to successfully use the products they purchase here at Gumball Machine Warehouse.  So with that being said we are starting with the basics! 

Filling Your Machine

Although each gumball / candy machine has it's own style, the concept is always the same. In this specific video and blog we will be using the Rhino Classic gumball machine with a candy wheel.

(MAKE SURE IT HAS A CANDY WHEEL OR YOUR PRODUCT WILL FALL OUT IF IT HAS ANY OTHER PRODUCT WHEEL!)

Filling your Rhino Classic is super easy though! Let me walk you through the 4 easy steps!

  1. Unlock your machine (Put the key in, push down and turn to the left. Keep turn until the lock unscrews and comes out of the machine.)
  2. Remove Lid
  3. Fill machine (This machine can old up to approximately 9lbs of Peanut M&M"s. Other product you can vend out of a Rhino Classic Gumball Machine when theres a candy wheel installed included. Skittles, Bones, Runts, Hot Tamales, Reese's Pieces, and other small bite size candy)
  4. Put lid back on
  5. Lock your machine (Put the lock in the hole of the lid, put key into the lock, push down and turn right until lock screws into place MAKE SURE NOT TO OVER TIGHTEN
  6. Put a couple quarters into your machine to make sure the product wheel is completely filled with product (If product doesn't come out please try 2 or 3 times until it does)
And there we have it! You have successfully filled your candy machine!

LEAVE A COMMENT

Please note, comments must be approved before they are published


BACK TO TOP