• GMW is now part of the CandyMachines.com Family.
    For continued service, please visit CandyMachines.com
    Toll Free: 800-853-3941

How to make your gumball machine dispense 1.1" Capsules | Gumball Machine Warehouse

by Bryan La Rue on April 25, 2014

As most of us in the vending business know, most vending toys come in the standard  1.1" Acorn Capsule , which cannot be dispensed by a standard gumball wheel. Wrong! With a simple alteration, your  Rhino Vending Gumball/ Candy Machine  can easily dispense these attention grabbing toys.

  1. Unlock the top of your machine
  2. Remove Lid and top ring (501P and 501M)
  3. Remove the side rods (on 501P, 501M and 505M) or the fascening screws (504P)
  4. Remove globe and bottom ring
  5. Remove brush plate
  6. Remove gumball wheel
  7. Remove riser and place off to the side
  8. Re-assemble your machine without the riser

After these steps are completed, all you need to do is load your 1.1" capsules into your machine and tyou are all set to go. We also sell  1" Round Capsules  which can vend out of your machine withpout making this adjustment. Check out the additional YouTube video below!

https://www.youtube.com/watch?v=D_waul2EDfA

LEAVE A COMMENT

Please note, comments must be approved before they are published


BACK TO TOP